Min/Max Inventory Across Multiple Locations: Why One Reorder Point Fails and How to Set One Per Location
Inventory Management

Min/Max Inventory Across Multiple Locations: Why One Reorder Point Fails and How to Set One Per Location

You set a minimum of 20 on your best seller. Your system says you have 34, so nobody reorders. Meanwhile one store has zero and a customer just left empty-handed. Here's how to set min/max levels per location, when to transfer instead of reordering, and how to run it from a phone.

12 min read·1435 words

The Total Looked Fine

Here's a situation that happens all the time once a business opens a second location.

You sell a case of shop rags. You set its minimum to 20, the system shows 34 on hand, and nobody thinks about it again. Then a customer walks into your east-side store, asks for rags, and there are none. Not "running low." None.

The 34 were real. It's just that 31 of them were sitting in the warehouse and 3 were at the main store. The east store had been at zero for four days.

The total was fine, and the shelf was empty. Every single-number reorder point eventually does this to you once you have more than one location. That's not a problem with your software. It's a problem with the setup.

If you haven't set min/max levels before, start with our min/max inventory levels and counting guide. This post picks up from there: what changes when the same product lives in two, three or ten places at once.


Why One Number Fails

A single company-wide minimum assumes one thing that is almost never true: that stock can move instantly to wherever it's needed.

It can't. A box in the warehouse is no help to a customer standing in a store across town. So your total can sit comfortably above the minimum while one location runs dry, and an alert based on the total will never fire.

It goes wrong in the other direction too. Your warehouse might hold 200 of something, and the total looks healthy, so the stores never get restocked from it. Or someone reorders from the supplier because "the store is out," while the warehouse has a pallet of the same product. Now you've paid for stock you already owned.

Multi-location inventory doesn't have one stock level. It has a stock level per location, and each one needs its own rules.


Step 1: Give Each Location Its Own Min and Max

Locations sell at different speeds, so they need different numbers. The same simple formula from the min/max guide works. You just run it once per location:

Min = (daily sales at that location × lead time to restock it) + safety stock Max = min + how much you'd normally order or move at once

The important change is lead time. For a store, lead time usually isn't your supplier's lead time anymore. It's how long it takes to get stock from your own warehouse to that store. That's often one or two days, not two weeks.

Here's a worked example for the shop rags:

| Location | Sells per day | Restock lead time | Safety stock | Min | Max | |---|---|---|---|---|---| | Main store | 2 | 2 days (from warehouse) | 4 | 8 | 20 | | East store | 1 | 2 days (from warehouse) | 3 | 5 | 12 | | Warehouse | 3 (feeds both stores) | 14 days (from supplier) | 15 | 57 | 120 |

Two things stand out.

First, the stores' minimums are small. They only need enough to last until the next delivery from your warehouse, which is close by.

Second, the warehouse carries the long supplier lead time. It holds the buffer for everyone. That's how it should be: you keep the deep stock in one place, and keep the stores lean and topped up.


Step 2: Transfer Before You Reorder

This is the habit that saves the most money, and the one most businesses skip.

When a location drops below its minimum, ask one question before you call the supplier:

Does another location have more than it needs?

A simple rule works well: if another location is above its max, move the extra over first. Only reorder from the supplier when nobody has a surplus, or when the warehouse itself drops below its minimum.

Back to the rags. The east store drops to 2 (below its min of 5). The warehouse has 80, comfortably above its min of 57. So you move 10 to the east store, bringing it up to 12 (its max). The warehouse goes down to 70. No purchase order, no 14-day wait, no extra cash spent.

Transfers have a real cost too: someone's time and a trip in the truck. So batch them. One run on Tuesday and one on Friday is usually better than five small trips.


Step 3: Record the Transfer Properly

A transfer is two changes, not one: stock leaves one location and arrives at another.

Most stock-count errors at multi-location businesses come from transfers that were only half recorded. Someone drives 10 units across town, puts them on the shelf, and nobody takes them out of the warehouse count. Now your system thinks you have 10 more than you do, and that's exactly the stock you'll go looking for in a month.

Whatever system you use, make sure a transfer:

  • Takes the stock out of the location it left
  • Adds it to the location it arrived at
  • Records who moved it and when, so you can trace a missing box

If your tool can't do that in one step, it's worth knowing before you add a third location.


Step 4: Get Alerts Per Location, Not Per Product

Once each location has its own min, your low-stock alerts need to follow suit. An alert that says "Shop rags: low" isn't enough. You need "Shop rags: low at East store (2 left, min 5)."

That one detail changes who acts on it. The store manager knows they need a transfer. The warehouse lead sees whether they have surplus to send. And whoever handles purchasing only steps in when the warehouse itself is low.

This is also where doing it on a phone matters. The person standing at the empty shelf is the one who notices first. If they can scan the item and see stock at every location in a few seconds, the transfer gets requested on the spot instead of at the end of the week. That's the main reason we keep coming back to phone scanning in our best inventory app for small business breakdown.


Step 5: Review the Numbers Every Month

Min and max levels aren't set-and-forget. Sales change, a location gets busier, a supplier gets slower.

Once a month, take 20 minutes and look at your top items at each location:

  • Ran out more than once? Raise that location's min.
  • Always sitting near the max? Lower it, because that's cash tied up on a shelf.
  • Getting transfers every week? That location's min is probably too low, or it should be restocked on a regular schedule.
  • Never sends or receives anything? It might not need its own min on that item at all.

Then do a quick count of the items you changed. Numbers based on a wrong stock count just make the wrong decisions faster.


When You Don't Need This

To be fair: if your second "location" is a single shelf in your truck, or both spots are in the same building and you can see them both, one company-wide minimum is probably fine. Keep it simple.

Per-location min/max starts paying off when:

  • Your locations are far enough apart that moving stock takes real time
  • Different locations sell different products at different speeds
  • You've already had a "the system said we had it" moment

If that's you, it's also worth reading our comparison of the best multi-location inventory management software, because not every tool handles per-location minimums or two-sided transfers well.


The Short Version

  • One total stock level hides empty shelves. Each location needs its own min and max.
  • Store lead time = time to restock from your own warehouse, not from the supplier. Keep stores lean and the warehouse deep.
  • Transfer before you reorder. If another location is above its max, move stock first.
  • Record both sides of every transfer with who and when.
  • Alerts should name the location, and the person at the shelf should be able to check every location from their phone.
  • Review monthly and adjust.

None of this needs a big system. It needs the right numbers in the right places, and one clear rule for when to move stock instead of buying more.

SaskInventory handles per-location stock, low-stock alerts, transfers and phone scanning in one place, priced in Canadian dollars. See the plans → · Ask us a question →

SaskInventory Logo

Written by the SaskInventory Team

Helping Saskatchewan businesses streamline inventory, track equipment, and run smarter operations since day one.

Keep Reading